Brake cylinder METELLI 040703

  One of the leaders in hydraulic engineering  LPR is an Italian company specializing in car brakes. It supplies original products to a number of automotive companies, which include Renault, Mazda, GM, as well as PSA Group, Maserati and Ferrari. All spare parts have ISO 9002 quality certificate and a separate certificate from the Italian company Ferrari.   In the product line of LPR you can find all the brake parts, as well as automotive LINES, some clutch elements (cylinders, bearings). The Italian spare parts produced in just 4 plants are of very high quality. They are often compared with products from Brembo, Bosch and ABS from Asian factories - the price is about the same, but the quality is much higher. The LPR brakes are particularly good because they have stable braking torque, low noise and low wear rate. It should be noted that the best LPR products are produced in Italian factories and it is difficult to find them in the countries of Eastern Europe. When purchasing spare parts (such as brake pads), check the packaging for manufacturer country, codes, and additional content information. Important point: branded pads are excellent brake, but quite quickly knock out brake disks of almost any manufacturer. It is better to take a kit from the LPR. 

Auto parts, which are represented under the brand name Samko, produced by the Italian company LPR, known on the market since 1952, as a supplier of original parts. Samko products are designed for after-sales car service and are completely identical to the LPR range. The manufacturer offers the following brake system components: pads, disks, drums, cylinders, repair kits, working clutch cylinders, adjusters, drive shafts, connecting elements, pumps, brake hoses, clutch hoses and so on. Spare parts are manufactured at the company's facilities located in Italy and France. It is sold in 76 countries. Samko brake pads are non-asbestos coated, have a high friction coefficient (which can vary depending on the temperature), have high stability, minimal abrasion, silent operation. The manufacturer's offer takes into account the needs of motor vehicles of European, American, Russian and Japanese manufacturers. Customers rate Samko pads as good quality. The pads are versatile, perform well in operation, brake normally, do not creak. 

Metelli S.p.A. is one of the well-known manufacturers of auto components, sold both in the secondary market and in the primary market. Spare parts can be classified as a low-cost segment. Originally based only in Italy, the company shifted its focus to the location of production facilities in Poland. Please note that the offered auto parts comply with ISO 9002 requirements. In the Metelli catalogs the buyer will be able to find LINKS, drives, clutch and brake system parts, couplings, as well as HBC bolts, engine parts, adjustment washers. In total, the catalogs contain more than 7 thousand items. Spare parts are sold in at least 90 countries. The company is now completing its consolidation, having previously sold under the names of Cifam or Metelli.Reviews of the quality of Metelli spare parts are mixed. In general, these products are of average quality, which fully corresponds to the stated price. Many of the most expensive parts are named Peugeot, GM, Ferrari, Fiat, Iveco and Maseratti, and are actually manufactured by Metelli S.p.A. The products of the Italian company are rarely forged. Motorists should still pay attention to the quality of all packaging materials, consumables, as well as the quality of work with metal and the presence of grease where it should be present. 

Metelli S.p.A. is one of the well-known manufacturers of auto components, sold both in the secondary market and in the primary market. Spare parts can be classified as a low-cost segment. Originally based only in Italy, the company shifted its focus to the location of production facilities in Poland. Please note that the offered auto parts comply with ISO 9002 requirements. In the Metelli catalogs the buyer will be able to find LINKS, drives, clutch and brake system parts, couplings, as well as HBC bolts, engine parts, adjustment washers. In total, the catalogs contain more than 7 thousand items. Spare parts are sold in at least 90 countries. The company is now completing its consolidation, having previously sold under the names of Cifam or Metelli.Reviews of the quality of Metelli spare parts are mixed. In general, these products are of average quality, which fully corresponds to the stated price. Many of the most expensive parts are named Peugeot, GM, Ferrari, Fiat, Iveco and Maseratti, and are actually manufactured by Metelli S.p.A. The products of the Italian company are rarely forged. Motorists should still pay attention to the quality of all packaging materials, consumables, as well as the quality of work with metal and the presence of grease where it should be present. 

Metelli S.p.A. is one of the well-known manufacturers of auto components, sold both in the secondary market and in the primary market. Spare parts can be classified as a low-cost segment. Originally based only in Italy, the company shifted its focus to the location of production facilities in Poland. Please note that the offered auto parts comply with ISO 9002 requirements. In the Metelli catalogs the buyer will be able to find LINKS, drives, clutch and brake system parts, couplings, as well as HBC bolts, engine parts, adjustment washers. In total, the catalogs contain more than 7 thousand items. Spare parts are sold in at least 90 countries. The company is now completing its consolidation, having previously sold under the names of Cifam or Metelli.Reviews of the quality of Metelli spare parts are mixed. In general, these products are of average quality, which fully corresponds to the stated price. Many of the most expensive parts are named Peugeot, GM, Ferrari, Fiat, Iveco and Maseratti, and are actually manufactured by Metelli S.p.A. The products of the Italian company are rarely forged. Motorists should still pay attention to the quality of all packaging materials, consumables, as well as the quality of work with metal and the presence of grease where it should be present. 

Metelli S.p.A. is one of the well-known manufacturers of auto components, sold both in the secondary market and in the primary market. Spare parts can be classified as a low-cost segment. Originally based only in Italy, the company shifted its focus to the location of production facilities in Poland. Please note that the offered auto parts comply with ISO 9002 requirements. In the Metelli catalogs the buyer will be able to find LINKS, drives, clutch and brake system parts, couplings, as well as HBC bolts, engine parts, adjustment washers. In total, the catalogs contain more than 7 thousand items. Spare parts are sold in at least 90 countries. The company is now completing its consolidation, having previously sold under the names of Cifam or Metelli.Reviews of the quality of Metelli spare parts are mixed. In general, these products are of average quality, which fully corresponds to the stated price. Many of the most expensive parts are named Peugeot, GM, Ferrari, Fiat, Iveco and Maseratti, and are actually manufactured by Metelli S.p.A. The products of the Italian company are rarely forged. Motorists should still pay attention to the quality of all packaging materials, consumables, as well as the quality of work with metal and the presence of grease where it should be present. 

Metelli S.p.A. is one of the well-known manufacturers of auto components, sold both in the secondary market and in the primary market. Spare parts can be classified as a low-cost segment. Originally based only in Italy, the company shifted its focus to the location of production facilities in Poland. Please note that the offered auto parts comply with ISO 9002 requirements. In the Metelli catalogs the buyer will be able to find LINKS, drives, clutch and brake system parts, couplings, as well as HBC bolts, engine parts, adjustment washers. In total, the catalogs contain more than 7 thousand items. Spare parts are sold in at least 90 countries. The company is now completing its consolidation, having previously sold under the names of Cifam or Metelli.Reviews of the quality of Metelli spare parts are mixed. In general, these products are of average quality, which fully corresponds to the stated price. Many of the most expensive parts are named Peugeot, GM, Ferrari, Fiat, Iveco and Maseratti, and are actually manufactured by Metelli S.p.A. The products of the Italian company are rarely forged. Motorists should still pay attention to the quality of all packaging materials, consumables, as well as the quality of work with metal and the presence of grease where it should be present. 

Metelli S.p.A. is one of the well-known manufacturers of auto components, sold both in the secondary market and in the primary market. Spare parts can be classified as a low-cost segment. Originally based only in Italy, the company shifted its focus to the location of production facilities in Poland. Please note that the offered auto parts comply with ISO 9002 requirements. In the Metelli catalogs the buyer will be able to find LINKS, drives, clutch and brake system parts, couplings, as well as HBC bolts, engine parts, adjustment washers. In total, the catalogs contain more than 7 thousand items. Spare parts are sold in at least 90 countries. The company is now completing its consolidation, having previously sold under the names of Cifam or Metelli.Reviews of the quality of Metelli spare parts are mixed. In general, these products are of average quality, which fully corresponds to the stated price. Many of the most expensive parts are named Peugeot, GM, Ferrari, Fiat, Iveco and Maseratti, and are actually manufactured by Metelli S.p.A. The products of the Italian company are rarely forged. Motorists should still pay attention to the quality of all packaging materials, consumables, as well as the quality of work with metal and the presence of grease where it should be present.